What cable is used for console port?
RJ-45 connector
The console port uses an 8-pin RJ-45 connector. If you did not order a console cable, you need to provide an RJ-45-to-DB-9 adapter cable to connect the switch console port to a PC console port. You need to provide an RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal.
What is a console cable on router?
The Console Cable is used for the serial connection between your computer’s serial port and the console port on your TP-Link switch or router to access the CLI (Command Line Interface) of the device.
Can you connect an Ethernet cable to a console port?
The console port accepts a cable that has an RJ-45 connector. To connect the device to a management console (see Figure 4 and Figure 5): Connect one end of the Ethernet cable to the console port (labeled CON, CONSOLE, or CON1) on the device.
Is a console cable the same as Ethernet?
What matters most about console cables is the specific nature of the connection. This is not an Ethernet or networking connection. It is a terminal connection, and its purpose is to enable the connected computer to configure the networking device.
Are all console cables the same?
It depends. You’ll likely be able to use it on HP and Cisco gear, but there are some situations where the pinout is different or maybe you’ll have a device with a DB-9->DB-9 requirement. If in doubt, use the manufacturer’s cable.
What type of cable is needed to connect the console port of a router to the serial port of PC?
RJ-45 rollover cable
The RJ-45 rollover cable forms the core of the connection between the router’s console port and your computer’s serial port. To ensure the RJ-45 cable is a rollover cable, hold up the two connectors with the rear tab of each connector facing away from you.
What is console cable used for?
Rollover cable (also known as a Yost cable, Cisco cable, or a Console cable) is a type of null-modem cable that is used to connect a computer terminal to a router’s console port. This cable is typically flat (and has a light blue color) to help distinguish it from other types of network cabling.
How do I connect my router to my console cable?
To connect your laptop to the console port on your router:
- Plug the serial DB-9 end of the console cable into the serial DB-9 port on your laptop.
- Plug the Ethernet RJ-45 end of the console cable into the console port on the router.
What is a Cat5e crossover cable used for?
Crossover cable such as Cat5, Cat5e crossover cable, etc. is a type of twisted pair cable used to connect two devices of the same type such as “DTE to DTE” or ”DCE to DCE” in the following situations: One computer to another computer. One switch to another switch connecting a normal port on both sides.
What are RJ45 connectors?
The eight-pin RJ45 connector is a standardised interface which often connects a computer to a local area network (LAN). This type of connector was originally developed for telephone communications but is now used in a range of applications. The abbreviation, RJ45, stands for Registered Jack-45.
Which two types of cables can be used to connect to the console port of a Cisco router?
The console port is an asynchronous RS-232 serial port with an RJ-45 connector. You can use the RJ-45 rollover cable and the RJ-45/DSUB F/F adapter or the DB-9F/RJ-45F PC terminal adapter to connect the console port to a computer running terminal emulation software.
How do I access the console on my router?
Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.