What are the different types of drainage system?

Table of Contents

The types of drainage systems will allow you a better comprehension of their roles and how they work together.

Surface Drainage System. Surface drainage systems remove excess water from the land’s surface through channels or ditches.
Subsurface Drainage System.
Slope Drainage System.
Downspouts and Gutter Systems.

How do you build a drainage system?

Start digging. Dig a really big hole.
Install the dry well. Prepare the dry well.
Set the dry well in place. Lower the dry well into the hole after wrapping the sides with a special silt blocking landscape fabric.
Connect the drain tube.
Cover the tube with fabric.
Connect the downspouts to the drain line.

Where do rain water pipes go?

They are most commonly found attached to the corners of a building. The discharge from a downpipe can be: Directly connected to a drain discharging into a soakaway. Directly connected to a drain discharging into a surface water sewer.

What is a rainwater drain called?

A rainwater downpipe is a pipe that is used to direct rainwater away from a building, typically from roof guttering to a drainage system. It is sometimes also referred to as a downspout, drain spout, roof drain pipe or leader.

How do I build a backyard drainage?

Build a creek bed to direct water away from a low spot in your yard. Or if the slope of the ground permits it, use a creek bed to drain a low spot. Start by making a swale-essentially a gentle, shallow drainage ditch. Then line it with gravel or stones and add interest with boulders, a bridge or plantings.

Where do rainwater drains go?

The foul water from your property either drains into the main sewer or, if your property is not attached to a main sewer line, it drains into a septic tank. Surface Water: is water that is fairly clean. Surface water includes rainwater runoff from roofs, gutters, pond overflows, French drains, and driveways.

Can rainwater run into sewer?

Gutters and gullies should only collect rainwater and connect to the rainwater drain. Wastewater pipes should not be connected to the rainwater system. If the rainwater gutters and gullies are connected to the wastewater drain, rainwater could overwhelm the drain and cause flooding.